Transfer pit tracks are fabricated from quality structural steel components, built to your press manufactures specifications.
Channel tie bars are provided with each pit track assembly to insure proper track gauge and maintain the rails parallel.
The pit track shall house two cast iron "V" groove catches to hold a lock pin mounted on each end of the transfer table so the transfer table lines up with the adjacent track.
Remove any debris from and around pit rails and transfer pit to insure proper transfer table travel.
Periodically inspect pit rails for wear. If the pit rails show signs of wear most likely the transfer table wheels need to be replaced.
Check transfer pit locks for wear, replace as needed.
© 2001 Capital Track Co.